Jeep Wrangler

How to Easily Remove Jeep Wrangler’s Rear Drive Shaft

To remove the rear drive shaft of a Jeep Wrangler, first, park the vehicle on a level surface and ensure the emergency brake is engaged. Then, use a wrench to loosen the bolts connecting the drive shaft to the rear axle and transmission.

Once the bolts are removed, carefully slide the drive shaft out of the vehicle, being mindful of any fluid leakage or potential damage to surrounding components. Remember to support the drive shaft to prevent it from dropping and causing injury or damage.

The removed drive shaft can then be inspected, serviced, or replaced as necessary. Following these steps will ensure the safe removal of the rear drive shaft from a Jeep Wrangler.

Preparing For The Removal

Prepare for the removal of the rear drive shaft of your Jeep Wrangler with these simple steps. Follow the guidelines to ensure a smooth and efficient process and keep your Jeep running smoothly.

How to Easily Remove Jeep Wrangler’s Rear Drive Shaft

Removing The Rear Drive Shaft

When it comes to maintaining a Jeep Wrangler, removing the rear driveshaft is a task that may need to be performed at some point. Whether it's for a repair, upgrade, or maintenance, knowing how to properly remove the rear driveshaft of a Jeep Wrangler is essential. This process requires careful attention to detail and the right tools to ensure the driveshaft is removed safely and efficiently.

Access The Driveshaft

Before getting started, ensure the vehicle is securely parked on a level surface. Access the rear of the Jeep Wrangler and locate the rear driveshaft, which is connected to the transfer case and the rear differential. Use a jack to elevate the vehicle and support it with jack stands to provide convenient access to the driveshaft.

Detach The Driveshaft

Next, begin the process of detaching the rear driveshaft. Start by carefully removing the nuts or bolts that secure the driveshaft to the differential and the transfer case. Once the connections are loosened, carefully slide the driveshaft out of the transmission and the differential. It's important to handle the driveshaft with care to prevent any damage during the removal process.

Secure And Store The Driveshaft

After removing the rear driveshaft, it's crucial to secure and store it properly to avoid any potential damage. Place the driveshaft in a safe and clean area, ensuring it is stored in a way that prevents any bending or mishandling. Additionally, it's advisable to cap the ends of the driveshaft to protect the universal joints from dirt and debris.

Tips And Precautions

Rear drive shaft removal can be a straightforward process if you take the necessary precautions. To ensure safe and smooth removal, it is important to use proper safety equipment, take photos for reference, and label and organize components.

Use Proper Safety Equipment

  • Wear safety goggles and gloves to protect your eyes and hands from debris and sharp edges.
  • Use jack stands to secure the vehicle and prevent any unexpected movement during the removal process.

Take Photos For Reference

Before starting the removal process, take clear photos of the rear drive shaft from different angles. These photos will serve as a valuable reference when reassembling the components.

Label And Organize Components

As you disassemble the rear drive shaft, label each component with a marker or adhesive tape to ensure proper reassembly. Additionally, organize the components in a systematic manner to avoid confusion during reinstallation.

How to Easily Remove Jeep Wrangler's Rear Drive Shaft


Reinstalling The Rear Drive Shaft

Learn how to easily remove the rear drive shaft of your Jeep Wrangler with our step-by-step guide. Reinstalling the drive shaft is made simple with our expert instructions.

Align And Attach The Driveshaft

After removing the rear drive shaft of your Jeep Wrangler, it's time to reinstall it. The first step in this process is to align and attach the driveshaft properly. Follow these simple steps:

  1. Position the rear of the driveshaft into the differential yoke. Make sure the splines on the driveshaft match the splines on the yoke.
  2. Push the driveshaft forward until it aligns with the transmission output shaft.
  3. Ensure the U-joint is properly seated at both ends of the driveshaft.
  4. If necessary, rotate the driveshaft slightly to align the bolt holes on the yoke and the transmission output shaft.
  5. Once properly aligned, insert the retaining bolts through the bolt holes.

Tighten The Fasteners

Now that the driveshaft is aligned and attached, it's time to tighten the fasteners securely. Follow these steps:

  1. Using a wrench or socket, tighten the retaining bolts on the yoke and transmission output shaft.
  2. Start by hand-tightening each bolt, ensuring they are snug against the driveshaft.
  3. Using your tool, tighten each bolt in a crisscross pattern.
  4. Apply the appropriate torque using a torque wrench. Refer to your vehicle's manual for the recommended torque specifications.
  5. Check the bolts again to ensure they are tightened to the correct torque.

Your rear driveshaft is now reinstalled and ready to go. Ensure you've followed these steps correctly to avoid any issues with your Jeep Wrangler's drivetrain. Reinstalling the rear driveshaft is an essential task that should be performed carefully and accurately.

Testing And Final Steps

Once you have successfully removed the rear drive shaft from your Jeep Wrangler, it is essential to perform a few tests and complete the final steps to ensure proper functionality and safety. Following these steps will help you avoid any potential issues in the long run and ensure a smooth driving experience. Let's dive into the specifics:

Test The Driveshaft Connections

Before moving forward, it is crucial to test the connections of the driveshaft to ensure that everything is properly secured. Start by examining the yoke at both ends of the driveshaft for any signs of wear, damage, or looseness. Any issues with the yoke can lead to vibrations or even the complete failure of the driveshaft.

All bolts and fasteners should be checked for tightness. Use a torque wrench to ensure that everything is properly tightened to your vehicle's specifications. Double-check that the driveshaft is properly aligned and seated in the yoke. Any misalignment may result in damage to the driveshaft or other components of your Jeep.

If you notice any excessive play or abnormalities in the driveshaft connections, it is recommended to address the issues before reinstallation. Seeking professional help or consulting your vehicle's manual can assist you in resolving any problems.

Check For Proper Functionality

Once the driveshaft connections have been tested, it's time to ensure that everything is functioning correctly. Start your engine and engage the drive mode to perform a function test. While the engine is running, carefully observe the driveshaft for any unusual noises, vibrations, or wobbling.

If you notice anything out of the ordinary during this test, it is advisable to shut off the engine immediately and recheck the driveshaft connections. The proper functionality and balance of the driveshaft are crucial for a smooth and safe ride.

Clean Up And Dispose Of Waste

After completing the necessary tests, it's important to clean up your work area and dispose of any waste properly. Gather all the tools you used and return them to their designated places. Clean any greasy or oily residues from the drive shaft and its components, using appropriate cleaning agents.

Dispose of any waste materials, such as old grease or worn-out fasteners, in accordance with local regulations. Keep your work area clean and organized, ready for any future maintenance or repairs.

By following these testing and final steps, you can ensure that the rear drive shaft of your Jeep Wrangler is installed correctly and functioning optimally. Remember, regular maintenance and inspection of your driveshaft are crucial for the overall performance and longevity of your vehicle.

Frequently Asked Questions Of (How To Remove Rear Drive Shaft Of Jeep Wrangler)

Can I Drive In 4WD Without a Rear Driveshaft?

Driving in 4WD without the rear driveshaft can cause damage to the vehicle's transfer case and differential. It's not recommended.

Can You Replace A Drive Shaft Yourself?

Yes, if you have the necessary tools and experience. Replacing a drive shaft yourself requires mechanical expertise and proper safety precautions.

How Much Does It Cost To Replace A Jeep Drive Shaft?

The cost to replace a Jeep drive shaft can vary depending on various factors such as the model and year of the Jeep and whether you choose to buy a new or used drive shaft. On average, the cost can range from $200 to $1,000. It's best to consult a reliable mechanic for an accurate estimate.

Can You Drive A Jeep Wrangler Without The Front Driveshaft?

Yes, you can drive a Jeep Wrangler without the front driveshaft. However, this will make it operate only as a rear-wheel drive vehicle. It's important to note that the 4x4 system will not function properly without the front driveshaft.


To sum it up, removing the rear drive shaft of your Jeep Wrangler is a task that requires precision and the right tools. By following the steps outlined in this blog post, you can confidently tackle this procedure yourself. Just remember to take your time, use caution, and refer to your vehicle's manual for any additional guidance.

With a little patience and effort, you'll have your Jeep Wrangler's rear drive shaft removed in no time. Happy wrenching!

Tag Post :
How to Easily Remove Jeep Wrangler’s Rear Drive Shaft
Share This :

Leave a Reply

Your email address will not be published. Required fields are marked *

Recent Post

Dont Hesitate To Contact Us

Your feedback drives our adventure! Contact us with your questions, insights, or feedback.